The Method of Hob Computation
2021-08-26 13:43:54
jiangxingTools
1464
The Method of Hob Computation
Normal pitch=Mn x Π（Mn: Normal Module)
Axial pitch=Mn/cos LA
Lead=Axial pitch x Number of start
LA(Lead Angle)=sin-1(Mn x Number of start/Hob PCD)
Cam amount(relief amount)=Hob OD x Π x tan(cam angle)/Hob NT
Cam angle: Generally PA20°-10°， 14.5°-12°，25°-9°
Groove Lead=Hob PCD x Π/tan LA
Flute depth= Total tooth height if a hob+ Cam amount+1.5mm
Hob's Relief Angle=tan-1(tan PA x tan Cam angle)
相關(guān)文章
-
PA20° Standard Gear Milling Cutter with Module m9
PA20° Standard Gear Milling Cutter with Module m9Module: m9, pressre angle: 20°Dimensions of involut... - ?PA20° PCD 38mm Shank Type Gear Shaper Cutter with Module m1~m3.75
- PA20° Inserted Blade Gear Hob with Module m24
- PA20° Profile DIN3972 Standard Gear Hob Cutter with Module m2.75
- Timing Pulley Hob for HTD 5M
- PA14.5° DP Gear Hob
- ?PA30° PCD 50mm Bell Type Pinion Cutter with Module m3.5-m5
